Chargers and other accessories
WARNING!
This apparatus is intended for use when supplied with power
from the Standard Travel Charger (ACP-7U), Rapid Travel
Charger (ACP-9U), or Rapid Mobile Charger (LCH-8). Other
usage will invalidate any approval given to this apparatus
and may be dangerous.
The following chargers and other accessories are available
for your phone; please see your dealer for details. Also, refer
to any accessory options manual that may have been included
in your sales package for the entire line of authentic Nokia
accessories.
Note: When a charger is not in use, disconnect it from the
power source. Do not leave the battery connected to a charger
for longer than a week, since overcharging may shorten its
life. If left unused, a fully charged battery will discharge itself
over time.
ACP-7U Standard Travel Charger
Use this durable and economical
charger to charge all battery options.
Plug the charger into a wall outlet
and connect the connector to the
bottom of your phone. Check the
charging status on the phone display.
Calls can be made during charging,
but charging will stop for the duration
of the call.
Note: If the battery is completely empty, you cannot use the
phone until it has enough charge to operate.
The Standard Travel Charger is available for different voltage
levels and can also be used with the DCH-9 Compact Desktop
Charging Stand.
67
ACP-9U Rapid Travel Charger
The extremely light, functionally designed
Rapid Travel Charger charges your phone
battery quickly.
Plug the charger into a wall outlet and
connect the connector to the bottom of
your phone. Check the charging status
on the phone display. You can use your
phone while charging.
Operating within a voltage range of
100V-240V AC (50Hz-60Hz), the Rapid Travel Charger is
practically voltage-independent in normal office and
household use. Like the Standard Travel Charger, the Rapid
Travel Charger is compatible with all battery options. The
Rapid Travel Charger can also be used with the DCH-9
Compact Desktop Charging Stand.
LCH-8 Rapid Mobile Charger
The multivoltage Rapid Mobile
Charger allows you to charge
your phone when you travel.
The small charger's functional
design fits well with most car
lighters and interiors.
Charging times are the same as for the Rapid Travel Charger
ACP-9U. Calls can be made during charging.
A green light indicates that the Rapid Mobile Charger is ready
to charge. Check the charging status on the phone display.
The input voltage is 12 or 24 V DC, negative grounding.
The Rapid Mobile Charger can be used with all accessories
available for your phone.
Avoid prolonged charging with the Rapid Mobile Charger
when the car engine is not running. This may cause the
battery of your car to drain.
Note: In some cars the cigarette lighter plug is not provided
with power when the ignition is switched off. Verify that the
green LED light is lit.
68
DCH-9 Compact Desktop Charging Stand
Compatible with all battery
options, the Compact
Desktop Charging Stand
can be used with the
Standard Travel Charger
ACP-7U or the Rapid Travel
Charger ACP-9U. The
Compact Desktop Charging
Stand provides mounting for both the phone and a spare
battery. Plug the charger into a wall outlet and connect the
connector to the back of the Compact Desktop Charging
Stand. Place your phone and/or a spare battery in the stand
to begin battery charging.
When the phone is charging, no lights are displayed on the
stand; check the charging status of the phone battery on
the phone display.
Charging moves to the rear slot once the front battery is
100% charged.
When the spare battery is charging, check the status indicator
on the left side of the charging stand. A red light indicates
that the battery is charging; a green light indicates that the
battery is charged to at least 80% of its capacity.
The phone has the built-in intelligence to maintain the battery,
so there is no need for a discharge feature on the stand.
DCH-9 Rear Slot Charging Times
Battery
Using ACP-7U
Using ACP-9U
Front slot
empty
Front slot
occupied
Front slot
empty
Front slot
occupied
BPS-1 Ultra Slim
Li-Polymer 600 mAh
4 hrs,
30 minutes
6 hrs,
30 minutes
3 hrs
4 hrs,
30 minutes
BLS-2N Extended
Li-Ion 900 mAh
6 hrs,
30 min
8 hrs,
30 min
4 hrs,
30 min
5 hrs,
30 min
BMS-2S Extended
NiMH 900 mAh
BMS-2V Vibrating
NiMH 900 mAh
BLS-4 Ultra Extended
Li-Ion 1500 mAh
12 hrs
15 hrs,
45 min
8 hrs
10 hrs,
30 min
69